• Online stores
  • Post ideas

Bag product photography: shape, hardware and the inside

Bag product photography with a phone: stuffing for shape, hardware without glare, straps, the inside, size in the photo, leather grain and what to call leather.

  • By Season
  • Published
  • 9 min read

Bag product photography with a phone works when the bag looks full, the hardware doesn’t flash and the buyer can tell its size. Stuff it with tissue, light it from one side by a window, turn it until the metal stops reflecting the room, then add three shots: the inside, the straps, and the bag next to a hand.

Below: how to do each on a kitchen table, how to keep leather grain and color true, what US guidance says you may call “leather” in a caption, and how one afternoon of photos fills weeks of Instagram posts.

Why an empty bag looks cheap

Buyers picture a bag carrying their things. An empty tote sags, a crossbody folds at the gusset, a pouch lies there like a napkin, and the bag looks thinner and cheaper than it is. Fill it, without the filling showing:

  • Tissue inside a plastic grocery bag. It fills the corners and pulls out in one piece, with no scraps left in the lining.
  • Cardboard cut to the base of totes and bucket bags, so the bottom doesn’t sag into a smile.
  • A folded towel for pouches and clutches, thick enough for depth without straining the zip.
  • A rolled sweatshirt for backpacks, shaped to the back panel, not to a ball.

Stop before the seams pull: overstuffed leather creases at the corners. Fill it to the shape it has with a wallet, phone and keys inside. Then look into the opening from where the phone will be, and push down any tissue you can see.

The shots a bag listing needs

Each shot stands in for something a buyer can’t do through a screen. Where the phone goes is what keeps the bag from looking warped.

ShotBest forWhere the phone goesWatch out for
Front, standingEvery bagLevel with the middle of the bag, about three feet backPhone tilted down, so the top looks wider than the base
Three-quarter turnTotes, crossbodies, backpacksSame height, bag turned about 45 degreesThe gusset lost in shadow: turn it toward the window
Back and baseBackpacks, totes with feetLevel for the back, above for the baseSkipping the back panel, the side people wear
Inside, openAnything with a lining or pocketsAbove, angled downA black hole: bounce light in with a white card
Hardware close-upClasps, zip pulls, rings, logo platesAbout six inches away, slightly to one sideYour own reflection in the metal
Strap and handleShoulder bags, top handlesLevel, strap standing or hangingHandles flopped flat, hiding the drop
WornAnything carriedAcross the roomA face stealing the frame: crop at the chin
SizeBags, wallets, pouchesAbove or levelProps so big the bag looks tiny

A new color of an existing style needs only the front, the three-quarter turn and a leather close-up.

Hardware without glare

Polished brass and nickel are small mirrors. The window shows up as a white streak, a lamp as a hot spot, you and your phone as a dark blob in the clasp. Work through it in order:

  1. Turn the bag a few degrees until the streak runs along an edge of the metal instead of across the logo.
  2. Step back and use the 2x lens if your phone has one. Your reflection shrinks, and the bag’s lines bend less than with the wide lens up close.
  3. Hold a black card just out of frame, on the side facing the hardware. Polished metal needs something dark in it to read as metal; without it, a buckle is a white smear.
  4. Use a white card instead when brushed or antique hardware looks dull gray. It adds one soft highlight.
  5. Tap on the clasp and drag the brightness down until the shiny part keeps its edge.

Wipe the metal with a dry microfiber cloth before the close-up, and handle the bag by the strap from then on. Fingerprints are obvious at six inches.

Straps, handles and the inside

A top handle should stand the way it does in a hand: run clear fishing line from it to a shelf behind the bag, or tape it lightly to a box hidden behind. Long straps either curve loosely across the table for a flat lay or hang straight from a hook on a plain wall.

Then show strap drop, the distance from the top of the strap to the top of the bag. It tells a buyer whether the bag hangs at the hip or under the arm. Put a tape measure in one photo and write it in the description: “Strap drop: [number] in.”

The inside is where handmade bags win, and the shot most shops skip. Open the bag wide, shoot from above at an angle, and prop a white card on the side away from the window to throw light into it. Smooth the lining and leave one pocket zip half open. Then take a second inside shot with a phone, keys and a wallet in it, or a laptop in a work bag. Show only what fits with the bag closed, and say it in the description: “Fits a [size] phone, a card wallet and keys.”

Put the size in the photo

Buyers look at photos more than numbers. Use one of these:

  • A hand, holding the bag by its handle, or a wallet or pouch flat in an open palm.
  • A phone beside a wallet or tucked half into an outside pocket. Everyone knows their phone’s size.
  • A tape measure along the base. Not pretty, so put it last in the listing.

Measure the outside the same way for every bag (width at the base, height, depth) and give the top width too if it flares.

Leather product photography: grain and true color

Grain needs light skimming across it. With the window to the side, not behind you, each pebble and crease casts a tiny shadow and the leather stops looking like plastic. Go close on the parts that show handwork: one seam of stitching, a burnished edge with the light running along it, and the grain itself, flat to the lens. Every phone has a closest focus distance; if the screen blurs, back off and crop later.

Color goes wrong in predictable ways:

  • Brown and tan turn orange under lamps. Lamps off, window only, and one test frame with a white card beside the bag. Set white balance from the card when you edit, then copy it to the rest of the shoot.
  • Black goes gray and shiny when the phone exposes for a pale backdrop. Tap on the bag, and try a mid-gray background instead of white.
  • Oxblood, green and navy shift between lights. Check the edited photo next to the bag, in daylight.

What your captions can call “leather”

The FTC’s Guides for Select Leather and Imitation Leather Products (16 CFR Part 24) cover the “advertising of all kinds or types of leather or simulated-leather” goods, and the list names “wallets”, “coin purses”, “camera bags, ladies’ handbags, shoulder bags, purses, pocketbooks” and “similar articles”. They describe themselves as “administrative interpretations” of the FTC Act that “provide the basis for voluntary compliance.” The parts that touch a bag maker’s captions:

  • Plain “leather”: deceptive unless the product “is composed in all substantial parts of leather.”
  • Material that looks like leather but isn’t: that fact “should be disclosed”, with examples like “Not leather; Imitation leather; Simulated leather; Vinyl; Vinyl coated fabric; or Plastic.”
  • Mostly leather, some parts not: it “may be described as made of leather so long as accompanied by clear disclosure of the nonleather parts.”
  • Bonded leather: material with “ground, pulverized, shredded, reconstituted, or bonded leather” should not be represented “as being leather”; when those terms are used, disclose the percentage of leather fibers and non-leather substances.
  • “All leather”: don’t suggest a product is “made wholly of a particular composition” if it isn’t.
  • Pictures: a name, trademark, “depiction or device” shouldn’t suggest animal hide when there is none, including a tag “in the shape of a tanned hide”.
  • Where disclosures go: in advertising “irrespective of the media used”, and “in close conjunction with the representation.”
  • “Waterproof”: only if the product “prevents water from contact with its contents under normal conditions of intended use during the anticipated life of the product or material.”

The FTC’s own Leather Guides page notes that in 2019 it asked for comment on whether to keep, change or repeal them; the 2025 Code of Federal Regulations still prints them.

So caption what’s really there: “Vegetable-tanned leather outside, cotton canvas lining.” “Leather body, webbing strap.” “Hand-stitched along every seam, edges burnished by hand.” And “waxed canvas flap” rather than “waterproof”, unless the contents truly stay dry.

The free product caption generator drafts captions from a product name. Read each against the list above and fix any line that names a material wrongly.

One shoot, weeks of Instagram posts

A bag takes days to make, so each new style has to carry your Instagram for a while.

Frame for the grid. Hold the phone upright and leave room above the handles and below the base. Posts are 4:5 and the profile grid crops them taller; our guide to the Instagram new grid size shows where the crop falls. Keep the bag centered so no strap gets cut.

Shoot in passes. All the fronts first without moving the phone, then the insides, then the close-ups, then the worn shots when someone is free to model.

Spread it out. Three new bags from one shoot can give you roughly:

  1. Week one: the first bag’s front, a carousel of front, inside and strap, and the hide before cutting.
  2. Week two: the second bag worn, a stitching close-up, a “what fits” shot.
  3. Week three: the third bag in every color, a hardware close-up, a wallet in a hand.
  4. Week four: all three together, an edge being burnished, a size carousel with the tape.

Put a grain close-up between two fronts so the grid doesn’t read like a catalog. The free Instagram grid preview shows your next posts on your profile before they go up, and The 15-minute grid fix covers a grid that looks like three different shops. For ideas between launches, see boutique post ideas or, for makers, Etsy shop post ideas; product photography for Etsy covers listing photo order.

If posting is the step that keeps slipping, Season (in early access, not launched yet) can pick it up from your photos. It reads products, photos and prices from Shopify and WooCommerce stores, and an Etsy shop pastes its Instagram @ and adds product photos. Season then designs posts in your brand’s look, plans them on a calendar and publishes them at set times.

Before you shoot

  • Bag stuffed to its carried shape, no tissue showing.
  • Hardware wiped, black and white cards within reach.
  • Lamps off, white card for one test frame.
  • Phone, keys and a tape measure for size.
  • Captions that name every material honestly.

Shooting something else, or setting up a whole catalog? Our guide to ecommerce product photography points you to the right guide for each product, and the Instagram image resizer crops a finished photo to 4:5 or 3:4 in your browser.

Questions

What does handbag product photography need that other products don’t?

Handbag product photography has to show shape, hardware and how the bag is carried. Stuff the bag so it stands the way it does on a shoulder, turn it until the clasp stops mirroring the window, and add one shot on a person so buyers see where it sits. Then show the inside with the lining and a phone and keys in it.

How do I do purse product photography at home with a phone?

For purse product photography at home, set the purse on a table about three feet from a window, with the light coming from one side and the flash off. Fill it with tissue in a plastic bag so it holds its shape, tap on the leather to focus, and lower the exposure a little if the hardware glows. Shoot every purse in the collection from the same height.

What shots does backpack product photography need?

Backpack product photography needs the front, a three-quarter view, the back panel and straps, the inside of the main compartment, and the backpack worn. Stuff it to the shape it has when packed, not to a balloon, and lay a laptop or a water bottle inside or beside it so buyers can judge what fits. Show every pocket that opens.

How do I make pouch product photography look less flat?

Pouch product photography looks flat when the pouch lies empty and the light comes from the front. Slip a folded towel inside so it has some depth, light it from the side so the seams cast small shadows, and shoot one photo with the zip half open to show the lining. A hand holding it gives the size at a glance.

How do I get the color right in leather bag product photography?

In leather bag product photography, color goes wrong when the room has two kinds of light. Turn off the lamps, shoot by a window, and take one test shot with a white card next to the bag to set white balance when you edit. For black leather, tap on the bag rather than the background so the phone exposes for it, then check the photo against the real bag.

What are the key shots in leather wallet product photography?

Leather wallet product photography needs the wallet closed, the wallet open with cards in the slots, a close-up of the stitching and edges, and the wallet in a hand or next to a phone for scale. Move in close, but stop where your phone can still focus sharply. If any part isn’t leather, say so in the listing and the caption.

Sources

  1. 16 CFR Part 24, Guides for Select Leather and Imitation Leather Products (Code of Federal Regulations, 1-1-25 edition, U.S. Government Publishing Office). Accessed Nov 7, 2026.
  2. Leather Guides (Federal Trade Commission). Accessed Nov 7, 2026.

About this guide. Written by the Season team for small business owners who run their own Instagram. Every fact above links to where it comes from, and we update the guide when Instagram changes how things work.

Post ideas for your business

Boutique

38 ideas in 7 topics

New arrivals, Fitting room, How to wear it and 4 more

Etsy shop

35 ideas in 7 topics

The making, Materials, New in the shop and 4 more

Free tools

Keep reading

Your next 3 months of posts start here.

Paste your @ or your website. Season reads your brand and shows you your future grid.

  • Free, no card
  • No account needed
  • We never see your password