On this page
T-shirt product photography is mostly about the print. Shoot six photos of every design: front flat lay, back, a straight-on print close-up, fabric and label, and two shots on a person whose size you state. Steam out the fold lines, use window light from the side, flash off, and check that the ink colors on screen match the shirt in your hand.
Below: why each ink type photographs differently, how to lose fold lines without melting a transfer, how to show fit honestly, what Etsy and the FTC say, and how to get weeks of posts from one afternoon.
Six shots for every design
Give every design the same six photos, in the same order. Your collection looks planned, and you never wonder what to shoot next.
| # | Shot | How to set it up with a phone | What it tells the buyer | The usual mistake |
|---|---|---|---|---|
| 1 | Front flat lay | Shirt on a board on the floor, phone held flat above it, about 3 feet up | The whole design, at a glance | Shooting at an angle, so the print turns into a trapezoid |
| 2 | Back | Same setup, shirt flipped. Skip it if the back is blank, show the neck print if there is one | Is there a back print? | Forgetting it, then answering the question in your inbox |
| 3 | Print close-up | Phone parallel to the print, 8 to 12 inches away, 2x lens | Ink quality, fine lines, small text | Cropping off the edges of the design |
| 4 | Fabric and label | Collar and neck label, a fold of the sleeve, light low from the side | Weight, weave, brand of blank, size tag | A blurry tag nobody can read |
| 5 | On a person, facing the camera | Phone at chest height, 6 to 8 feet back, arms relaxed | Fit, length, where the print sits on a body | Shooting from below, which shortens the shirt |
| 6 | Worn, with movement | Walking, reaching, sitting on a step, same location | How it moves and drapes | Busy backgrounds that compete with the print |
Shots 1 to 4 take an afternoon for a dozen designs. Shots 5 and 6 need a person, so batch them: the whole drop, one friend, one session.
Getting the print color right
Your phone guesses what “white” is from the whole frame. A big black shirt fools it, so does a bright window, and the print comes out a shade off from what arrives in the mailer.
Use one kind of light. Lamps off, a window with no direct sun on the shirt. Daylight plus a warm bulb makes the print one color on the left and another on the right.
Give the phone something neutral. Put a sheet of plain white printer paper at the edge of the frame for one test photo. When you edit, use the white balance picker on the paper, then copy that setting to every photo from the session and crop the paper out.
Expose for the shirt, not the room. Press and hold on the print to lock focus and exposure, then slide brightness down. Black tees go gray and muddy when the phone brightens them; white tees lose the texture of the ink when it’s too bright. Stop when the darkest part of the design still shows detail.
Know what your ink does in light. The fix is the angle of the light, not the edit:
- Plastisol screen prints sit on top of the fabric with a slight sheen. Light from the side, not from behind you, so the print doesn’t flash white.
- Water-based and discharge prints soak in and look matte. Low side light shows the fabric grain through the ink, which is the selling point.
- Direct-to-garment prints on dark shirts sit on a white base layer. Shoot the close-up straight on so the edges look clean.
- Vinyl and heat transfers are glossy and mirror the window. Tilt the board a little until the reflection slides off the print.
- Puff prints are about height. Put the light very low to one side so each letter casts a small shadow, and the raised edge reads on a phone screen.
Then hold the shirt next to the screen in daylight. If the reds don’t match, fix it before you post.
Wrinkles, folds and where the shirt sits
Fold lines from the bag show on camera far more than in person. A cheap handheld steamer is the best few dollars you’ll spend here.
Steam, don’t iron the print. An iron straight on a vinyl transfer or a thick plastisol print can soften or smear it. Steam from the inside of the shirt, or turn it inside out and iron through a cotton cloth on low. Let it hang a few minutes, then lint-roll it, especially black tees.
Flat lay. The cheapest way to make every design look the same. Lay the shirt on a foam board or a clean floor, smooth it from the center out, and fold the sides under a little so the body narrows toward the hem like it would on a person. A sheet of tissue paper inside stops the back seam and the back print showing through a light shirt. Bend the sleeves slightly down, not straight out like a cross.
Pinned. A flat lay on a foam board stood against a wall, pins pushed in from behind. You shoot standing, phone at print height, which helps on a small floor.
Hanging. A wooden hanger on a plain wall, when the shirt is on a hanger, a binder clip at the back of the waist so it doesn’t hang like a tent. Relaxed, but the print rarely sits flat.
Ghost mannequin, explained simply. You photograph the shirt on a mannequin, then photograph the inside of the back of the neck, and combine the two in editing so the mannequin disappears and the shirt looks worn by no one. It looks polished, but costs a mannequin and editing time per design. For a small print shop, a well-shaped flat lay plus real people does the job.
Show the fit with a person, and give their numbers
A flat lay can’t say if a medium is roomy or snug. A person can, if the buyer knows who they are.
Put one line under the worn photos: “Jordan is 5’9”, usually wears a medium, wearing a medium here.” If you can, shoot the same design on two people with different builds, each in their own size. Ask them first, and get a yes in writing before their photo goes on your store or your Instagram.
Two habits keep the photo honest:
- Shoot from chest height, straight on. A low angle makes the shirt look longer, a high one makes it look shorter.
- No clips at the back of a shirt worn on a person. Pinning a shirt tight looks good in the photo and fits differently in the mail.
Then add the shot buyers actually use to choose a size: the shirt in a flat lay with a soft tape measure across the chest, from armpit seam to armpit seam, and a second one from the top of the shoulder to the hem. Do it for each size once, and it doubles as a size chart photo.
Mockups, real photos, and what the rules say
Mockups are tempting with print on demand, but a mockup shows the color you designed, not the one the printer gets on that blank.
If you sell on Etsy, its listing image requirements say sellers must use “original photos of the actual product buyers will receive, not renderings or stock photos,” with exceptions. One of them covers designs printed through a production partner: for an original design that a production partner prints onto a base item like a t-shirt, Etsy says “you may use a stock photo mockup to illustrate the end product buyers will receive.” For personalized items, the first image must show a finished, customized item, and Etsy prohibits “a photo of the blank product or a mockup with placeholder text” as that image.
On your own store, our suggestion: order one sample per design, photograph it, and keep mockups for colorways you haven’t printed yet.
The product page matters too, not just the photos. The FTC’s guide to textile labeling says country of origin must be disclosed in mail order and internet advertising, and that if a written ad for a textile product “makes any statement about a fiber,” the label’s fiber content “must appear in the ad, minus the percentages.” The same guide says imported unfinished cloth (greige goods) that is dyed, printed and finished in the US can’t be labeled “Made in U.S.A.” without qualification. So if your blanks come from abroad, “printed in Ohio” in a caption says what’s true; “Made in USA” may not.
Crop for the Instagram grid
Hold the phone upright for every shot. Posts can be 4:5, and the profile grid shows them cropped to 3:4, which our guide to the Instagram new grid size walks through. Keep the whole print in the middle of the frame, with a hand’s width of shirt around it, so the grid tile doesn’t cut a word off the design.
Flat lays read well as tiles; in full worn shots the print gets small, so pair them with a close-up in a carousel. The free Instagram grid preview shows how your photos will look side by side before you post them.
Turn one shoot into weeks of posts
You drop designs a few times a year but post every week, so plan the shoot for the feed too.
Shoot in passes. All the flat lays first, without moving the board. Then the close-ups. Then the people, outdoors or by the big window. Last, the making: the screen being pulled, a transfer peeling off the press, shirts on the drying rack, the mailers stacked by the door.
Spread it out. A drop of four designs gives you a month without reshooting:
- Week one: the hero design worn, its print close-up, a stack of all four.
- Week two: the second design flat, a size photo with the tape measure, a print-in-progress shot.
- Week three: the third design on two people, a fabric and label close-up, a carousel of every colorway.
- Week four: the last design worn outdoors, the packed mailer, a “which one’s yours?” post with all four flat.
Write captions while it’s fresh: ink, blank, the idea behind the design, who’s wearing what size. The free product caption generator gives you drafts to edit. For what to post between drops, the clothing brand post ideas page has ideas with captions. If your grid already looks like three different shops, the 15-minute grid fix shows what to change in one sitting, and if you also sell on Etsy, product photography for Etsy covers listing photos across products.
If the photos are done but posting is the part that never happens, Season (in early access, not launched yet) can take it from there. It reads products and photos from Shopify and WooCommerce stores; for an Etsy shop you paste your Instagram @ and add your product photos. It designs posts in your brand’s look, plans a season of them on a calendar and publishes them at set times, and you can change or skip any post before it goes live.
Before you start shooting
- Shirts steamed and lint-rolled.
- Lamps off, flash off, white paper for one test shot.
- Light angled for the ink.
- Model’s height and size written down, tape measure out.
- Every shot upright, print in the middle.
Shooting something else, or setting up a whole catalog? Our guide to ecommerce product photography points you to the right guide for each product, and the Instagram image resizer crops a finished photo to 4:5 or 3:4 in your browser.
Questions
What are good t shirt product photography ideas?
Start with the same six shots for every design: a flat lay of the front, the back, a straight-on close-up of the print, the fabric and neck label, the shirt on a person facing the camera, and one worn shot with some movement. After that, try the shirt folded in a stack of colorways, the print being pulled or pressed, and the tee packed in its mailer. Keep the angle and surface the same across designs so your shop looks like one collection.
What is the best t shirt product photography background?
For the product page, a plain background a few shades away from the shirt works best: light gray or off-white board for dark tees, a mid-gray or warm wood floor for white tees. Pure white behind a white shirt makes the edges disappear. For worn shots, a plain wall with no posters or doorframes keeps the eye on the print.
What makes a good t shirt product picture?
A good t shirt product picture shows the print in the colors the buyer will actually receive, on a shirt with no fold lines, cropped so the whole design is readable on a phone. It’s taken in soft daylight with the flash off, and it matches the other photos in your shop in angle and background. If a person is wearing it, the caption says their height and the size they’re wearing.
How to take t shirt product photos with a phone?
Steam the shirt, lay it on a board near a window, and shoot from directly above with the phone flat, using the 1x or 2x lens rather than the ultra-wide. Turn the flash off, press and hold on the print to lock focus and exposure, then drag the brightness down until the darkest ink still shows detail. Shoot every design in the same spot, in one session, so the light stays the same.
What are some t-shirt photography ideas for Instagram?
Good t-shirt photography ideas for Instagram: the same design on three body types, a close-up of the ink texture, the screen or press mid-print, a flat lay with the tape measure across the chest, a shirt drying on the rack, and a stack of every colorway. Shoot them upright so they fit the profile grid. Our clothing brand post ideas page has more, with caption starters.
Sources
About this guide. Written by the Season team for small business owners who run their own Instagram. Every fact above links to where it comes from, and we update the guide when Instagram changes how things work.